Seachem CupriSorb 250ml

fi-SC206
Seachem CupriSorb 250ml. Is a powerful adsorbent of copper and heavy metals. It rapidly removes all types of copper, remaining effective until it attains a deep blue-black color. When in continuous use, it gradually pulls out precipitated copper and permits invertebrate culture in tanks previously treated with copper. A 100ml bag is adequate for up to 240L (60 gallons) and removes over 3000mg of copper or 12ppm in 240L (60 gallons). It may be repeatedly regenerated. Marine and Freshwater.. Is a powerful adsorbent of copper and heavy metals. It rapidly removes all types of copper, remaining effective until it attains a deep blue-black color. When in continuous use, it gradually pulls out precipitated copper and permits invertebrate culture in tanks previously treated with copper. A 100ml bag is adequate for up to 240L (60 gallons) and removes over 3000mg of copper or 12ppm in 240L (60 gallons). It may be repeatedly regenerated. Marine and Freshwater.

Seachem CupriSorb 4L (1.1 gal)

Seachem CupriSorb 4L (1.1 gal). Is a powerful adsorbent of copper and heavy metals. It rapidly removes all types of copper, remaining effective until it attains a deep blue-black color. When in continuous use, it gradually pulls out precipitated copper and permits invertebrate culture in tanks previously treated with copper. A 100ml bag is adequate for up to 240L (60 gallons) and removes over 3000mg of copper or 12ppm in 240L (60 gallons). It may be repeatedly regenerated. Marine and Freshwater. This item is a special order item that is drop shipped direct from Seachem.
Weight: 9 Lbs

Seachem de*Nitrate 1L (33.8 fl.oz)

fi-SC137
Seachem de*Nitrate 1L (33.8 fl.oz). Is a high porosity filtration productfor the removal and control of waste product in marine and freshwater aquaria by anaerobic denitrification. It is a porous inorganic solid about 4mm in diameter. It can be used in canister filter at slow flow rates or even on the tank bottom as a 'live' substrate enhancer. It does not require a special denitrifying filter or special culture feedings. It is also helpful in controlling nitrite and ammonia. The surface area characteristics of De*nitrate are similar to Matrix, making Denitrate an effective support for the biological filter. Each Liter treats up to 400L (100 gallons). Marine and freshwater.

Seachem de*Nitrate 2 L. Is a high porosity

fi-SC138
Seachem de*Nitrate 2 L. Is a high porosity filtration product for the removal and control of waste product in marine and freshwater aquaria by anaerobic denitrification. It is a porous inorganic solid about 4mm in diameter. It can be used in canister filter at slow flow rates or even on the tank bottom as a 'live' substrate enhancer. It does not require a special denitrifying filter or special culture feedings. It is also helpful in controlling nitrite and ammonia. The surface area characteristics of De*nitrate are similar to Matrix, making Denitrate an effective support for the biological filter. Each Liter treats up to 400L (100 gallons). Marine and freshwater.

Seachem de*Nitrate 20L

Seachem de*Nitrate 20L (5.3 gal). Is a high porosity filtration product for the removal and control of nitrate in marine and freshwater aquaria by anaerobic denitrification. It is a porous inorganic solid about 4mm in diameter. It can be used in canister filter at slow flow rates or even on the tank bottom as a 'live' substrate enhancer. It does not require a special denitrifying filter or special culture feedings. It is also helpful in controlling nitrite and ammonia. The surface area characteristics of De*Nitrate are similar to Matrix, making De*Nitrate an effective support for the biological filter. Each liter treats up to 400L (100 gallons). Marine and freshwater. This item is a special order item that is drop shipped direct from Seachem. 1 per case.

Email for exact quote on shipping

Seachem de*Nitrate 4 Liter.

Seachem de*Nitrate 4 Liter. Is a high porosity filtration product for the removal and control of waste product in marine and freshwater aquaria by anaerobic denitrification. It is a porous inorganic solid about 4mm in diameter. It can be used in canister filter at slow flow rates or even on the tank bottom as a 'live' substrate enhancer. It does not require a special denitrifying filter or special culture feedings. It is also helpful in controlling nitrite and ammonia. The surface area characteristics of De*nitrate are similar to Matrix, making Denitrate an effective support for the biological filter. Each Liter treats up to 400L (100 gallons). Marine and freshwater. 1 per case.

Seachem HyperSorb 4L (1.1 gal

Seachem HyperSorb 4L (1.1 gal). Is a synthetic adsorbent that outperforms all other blended synthetic media and carbons. It has exceptional organic removal capacity: it removes organic waste, toxic vapors and other pollutants. In freshwater it will help stabilize the ionic balance and will help to control ammonia, nitrite, and nitrate. It is easily regenerated with household bleach. A 100ml bag treats 120L (30 gallons). Marine and freshwater. This item is a special order item that is drop shipped direct from Seachem.

Seachem Matrix biomedia 1L

fi-SC117
Seachem Matrix biomedia 1L.  Is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Each liter of Matrix provides as much surface (internal and external) as 40 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix provides internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and de-nitrifying bacteria. This allows Matrix, unlike other forms of bio-media, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. As long as the water is well prefiltered, Matrix should not require replacement. Since the majority of the bacteria are internal, Matrix may be rinsed when needed without damaging the filter.

Seachem Matrix biomedia 20L

Seachem Matrix biomedia 20L. Is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Each liter of Matrix provides as much surface (internal and external) as 40 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix provides internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and de-nitrifying bacteria. This allows Matrix, unlike other forms of bio-media, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. As long as the water is well prefiltered, Matrix should not require replacement. Since the majority of the bacteria are internal, Matrix may be rinsed when needed without damaging the filter.

Email for exact price quote

Seachem Matrix biomedia 2L

fi-SC118
Seachem Matrix biomedia 2L. 4 per case. Is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Each liter of Matrix provides as much surface (internal and external) as 40 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix provides internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and de-nitrifying bacteria. This allows Matrix, unlike other forms of bio-media, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. As long as the water is well prefiltered, Matrix should not require replacement. Since the majority of the bacteria are internal, Matrix may be rinsed when needed without damaging the filter.

Seachem Matrix biomedia 4L

Seachem Matrix biomedia 4L. 1 per case. Is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Each liter of Matrix provides as much surface (internal and external) as 40 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix provides internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and de-nitrifying bacteria. This allows Matrix, unlike other forms of bio-media, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter. As long as the water is well prefiltered, Matrix should not require replacement. Since the majority of the bacteria are internal, Matrix may be rinsed when needed without damaging the filter

Seachem Matrix carbon 20L

Seachem Matrix carbon 20L. Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons). Marine and freshwater.
Weight: 50 Lbs.

Email for exact shipping

Seachem MatrixCarbon 1L (33.8 fl. oz.).

fi-SC107
Seachem MatrixCarbon 1L (33.8 fl. oz.). Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons).

Seachem MatrixCarbon 250 ml. - 8.5 fl. oz

fi-SC106
Seachem MatrixCarbon 250 ml. - 8.5 fl. oz. Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons). Mari

Seachem MatrixCarbon 2L (67.6 fl.oz)

fi-SC108
Seachem MatrixCarbon 2L (67.6 fl.oz). Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons). Marine and Freshwater

Seachem MatrixCarbon 4L

Seachem MatrixCarbon 4L (1.1 gal). 1 per case. Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons).

Seachem MatrixCarbon 500 ml. - 16.9 fl. oz

Seachem MatrixCarbon 500 ml. - 16.9 fl. oz. Is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with it's high density of macroporous binding sites. Matrix Carbon has very low ash content as indicated by it's minimal impact on pH. Even added to distilled water it does not raise pH above 7.0! While all carbons contain phosphate, regardless to claims of the contrary, Matrix Carbon has the lowest detectable leachable phosphate content of all major carbon brands tested. Matrix Carbon outperforms other high-grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of absorption, and duration of use. 250ml treats 400L (100 gallons).

Seachem PhosGuard 1 Liter

fi-SC187
Seachem PhosGuard 1 Liter. Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater.

Seachem PhosGuard 100ml

fi-SC185
Seachem PhosGuard 100ml. Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater.

Seachem PhosGuard 2 Liter

fi-SC188
Seachem PhosGuard 2 Liter. Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater

Seachem PhosGuard 20L (5.3 gal)

Seachem PhosGuard 20L (5.3 gal). Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater. This item is a special order item that is drop shipped direct from Seachem.

Email for exact shipping quote

Seachem PhosGuard 250ml

fi-SC186
Seachem PhosGuard 250ml. Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater.

Seachem PhosGuard 4L

Seachem PhosGuard 4L. Is a high capacity and high efficiency filtration product for removing phosphates and silicates from marine and freshwater aquaria. Unlike competing products, Phosguard is bead-shaped for optimum flow characteristics and has an exceptional porosity for enhanced capacity. Phosguard has a working capacity to remove 20 to 60 mg-L of phosphate in 400L (100 gallons) with a similar impact on silicates. It may be used continuously or intermittently, and will not release removed phosphate. Each liter treats up to 1200L (300 gallons). Marine and freshwater.
Weight: 10 Lbs.

Seachem Purigen 100mL

fi-SC165
Seachem Purigen 100mL.  Is the premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ionic exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from the water at a rate and capacity that exceeds all others, by over 500%. Purigen removes proteins, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens with exhaustion, and is easily renewed with household bleach. A 100mL bag purifies and polishes up to 400L (100 gallons) of water for up to six months. Marine and freshwater.

Seachem Purigen 1L (33.8 fl.oz)

fi-SC167
Larger picture
Seachem Purigen 1L (33.8 fl.oz).  Is the premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ionic exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from the water at a rate and capacity that exceeds all others, by over 500%. Purigen removes proteins, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens with exhaustion, and is easily renewed with household bleach. A 100mL bag purifies and polishes up to 400L (100 gallons) of water for up to six months. Marine and freshwater.

Seachem Purigen 1L (33.8 fl.oz)

fi-SC167
Larger picture
Seachem Purigen 1L (33.8 fl.oz).  Is the premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ionic exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from the water at a rate and capacity that exceeds all others, by over 500%. Purigen removes proteins, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens with exhaustion, and is easily renewed with household bleach. A 100mL bag purifies and polishes up to 400L (100 gallons) of water for up to six months. Marine and freshwater.

Seachem Purigen 250ml (8.5fl.oz).

fi-SC166
Seachem Purigen 250ml (8.5fl.oz). Is the premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ionic exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from the water at a rate and capacity that exceeds all others, by over 500%. Purigen removes proteins, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens with exhaustion, and is easily renewed with household bleach. A 100mL bag purifies and polishes up to 400L (100 gallons) of water for up to six months. Marine and freshwater.

Seachem Purigen 4L (1.1 gal)

Seachem Purigen 4L (1.1 gal). Is the premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ionic exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from the water at a rate and capacity that exceeds all others, by over 500%. Purigen removes proteins, nitrites and nitrates, ammonia, and a broad spectrum of organics, yet its impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens with exhaustion, and is easily renewed with household bleach. A 100mL bag purifies and polishes up to 400L (100 gallons) of water for up to six months. Marine and freshwater. This item is a special order item that is drop shipped directly
Weight: 9 Lbs.

Email for exact shipping

Seachem Renew 20L 5.3 gal

Seachem Renew 20L (5.3 gal.) Is ideal in systems where phosphate released from all activated carbons poses a problem. Renew is also less aggressive than carbon, making it well suited for reefs and well-planted aquaria. It is also beneficial for use in soft-water aquaria where the pH raising property of carbons is not an asset. Renew will remove organics and particulates in the sub-micron range; it will also help control ammonia, phosphates and nitrates. Renew is also quite economical owing to its low up-front cost. 250mL treats up to 160L (40 gallons). Marine and freshwater. This item is a special order item only

Email for exact shipping price

Seachem SeaGel 1 Liter

fi-SC67
Seachem SeaGel 1 Liter. Is a blend of MatrixCarbon and PhosGuard. Matrixcarbon is an ultra-capacity carbon for the removal of organic and color impurities. PhosGuard is a powerful remover of phosphate, silicate, toxic metals and acids. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for marine and reef use. May also be used in freshwater that is not phosphate buffered. 250ml treats 160-240L (40-60 gallons). Marine and freshwater